********************************************************************************
***
*** Deltares, FLOW2D3D Version 6.02.13.000000, May 25 2018, 16:21:41
***           built from : https://svn.oss.deltares.nl/repos/delft3d/tags/7545
***
***           runid      : 271
***           date,time  : 2018-06-19, 16:05:13
***
********************************************************************************

*** MESSAGE Running parallel. Partition 001: 
            mmax                 : 99
            mfg                  : 1
            mlg                  : 99
            nmax                 : 335
            nfg                  : 1
            nlg                  : 335
            active        points : 5672
            non-active    points : 27079
            communication points : 414
            total         points : 33165
*** MESSAGE Executable for 64-bits platform. 
*** MESSAGE Double precision computation using reals of kind    8 
*** Start of User Defined Model description 
 -
 -  Modelo Caribe 2010 - 2011     
 -  Fornteras TMD                 
 -  3 min                         
 -  Conf 1                        
 -
*** End   of User Defined Model description 

 
Coordinate System: Spherical
 
 
Coordinate System: Spherical
 
*** WARNING Ratio in layer thickness of the two bottom layers is larger than 1.5. 
            May lead to inaccurate representation of the bottom boundary layer.
*** MESSAGE Upwind advection scheme only near momentum discharges 
*** WARNING Discharge (m,n,k)=(213,93,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(214,88,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(215,84,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(216,84,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(217,80,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(216,77,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(216,73,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(231,163,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(254,248,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(317,64,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Discharge (m,n,k)=(481,180,0) is disabled: inlet and/or outfall not in this partition 
*** WARNING Using Smoothing time and initial condition file 
*** MESSAGE Ocean heat model: Stanton number specified to be    0.10000E-02 
*** MESSAGE Ocean heat model: Dalton number specified to be    0.10000E-02 
*** MESSAGE Using UNESCO density formulation by default 
*** MESSAGE Evaporation not taken into account in continuity equation 
*** MESSAGE Number of pivot points to convert wind speed to wind drag coef.: 2 
*** MESSAGE Updating tidal node factors every   0.6000E+02 [min] 
*** MESSAGE Momentum solver cyclic method is specified 
*** MESSAGE DRYFLP and DPSOPT both specified in MD-file. Using DPSOPT: MEAN 
*** MESSAGE Transport solver cyclic-method method is specified 
          remap n=  16 mnit1 =   95 334 mint2 =   99 334 - node number 001
*** MESSAGE His, map, drogue, and fourier files written in single precision (except for time and horizontal coordinates).
*** MESSAGE Uniform wind and pressure specified 
*** MESSAGE Heat model: Secchi depth specified to be   30.0000000 m 
*** ERROR Drogues/walking monitor points are not available in parallel computations 
*** ERROR Flow exited abnormally